Introduction

Americos GranofilAmericos Granofil is a Perlite which is introduced by Americos in two categories, one in powder and second in crystal foam. It gives a denim garment a casual look and uniform abrasion on garment without loss in fabric strength. It can be used for wide range of cellulosic fabrics such as cotton, viscose, and tencel.

Though Americos Granofil has various applications but its introduction in garment processing has revolutionized the finishing of cellulosic and blended textile materials. This has been done by the modification of its physical form and making it suitable for garment processing industry. Americos Granofil can be used on wide range of cellulosics as well as blended fabrics such as cotton, rayon, tencel etc. Americos Granofil when applied on garments gives a gentle abrasion without disturbing the typical fabric properties viz., strength, colour and tone. The abrasion results in mild peach finish and removes extra gloss from the fabric to give it a casual look.

Moreover being a light weight material it does not damages the equipment as well as the garments, that is generally the problem in case of pumice stone application. It also has an excellent compatibility with acid cellulase as well as neutral cellulase enzymes as it is recommended to be used with the latter. Since it is not affected by the pH of the bath it could be used in any medium viz. acid, neutral and alkaline. It saves the enzyme dosages and the processing time that further results in saving of various resources like electricity, man power etc.

Americos Granofil is currently available in three variants namely Americos Granofil 1.5G and Americos Granofil 2.4D. Where sold by Americos Granofil 1.5G is developed for light weight garments that weight maximum of 8 oz and Americos Granofil 2.4D for heavy garments that weight 8 oz and above. Americos Granofil 3.8F for powder grade and it works for abrasion on light/heavy garment.


Typical Dosage Table

Application Procedure

Americos Granofil is to be added into the bath prior to any other chemicals including enzymes. The liquor ratio can be maintained as per the requirement of other chemicals. The machine should be run for a couple of minutes to ensure proper dispersion of Americos Granofil among the garments. The other chemicals can be then added including the enzymes. Process timings can be adjusted between 50 to 100 minutes depending upon the desired results. And temperature can also be maintained as required by enzymes in specific.

Note: Fine mesh net could be inserted in the machine outlets so that Americos Granofil can be re collected again and also to avoid blockage of drainage lines.

Technical Service
Information covering specific application of this product is available. Americos Industries will work with customers to enhance processes and solve problems. Let us know what you need and we will assist you.

Introduction
Americos supplies of all types and grades of pumice stone. For textile general grade are 1 - 3 cm, 2 - 4 cm, 3 -5 cm and 5 -7 cm. It is pure white and leaves very little waste when used, compared to those of other stones, thus making Pumice recognized and demanded by the end users in many markets of the world.

There are three types of pumice products, which Americos supplies. The first is the micronized pumice powder, from 0 to 160 microns. The second is the pumicite (mainly for construction and horticulture purposes) from 3--8 mm to 15 - 20 mm. The third is the textile graded as 1 - 3 cm, 2 - 4 cm, 3-5 cm and 5-7 cm

Americos supplies following types of stones:

• 3-8 mm pumice stone double washed, three times tumbled
• 1 cm standard pumice Stone double washed, three times tumbled
• 1-2 cm/ 1-3 cm pumice stone double washed, three times tumbled
• 2-3 cm/2-4 cm pumice stone double washed, three times tumbled
• 3-5 cm/ 5-7 cm pumice stone double washed, three times tumbled
• 3-8 cm pumice stone double washed, three times tumbled

Technical Service
Information covering specific application of this product is available. Americos Industries will work with customers to enhance processes and solve problems. Let us know what you need and we will assist you.